craigslist | business/commercial in western slope

PHENOMENAL BUSINESS OPPORTUNITY (Rifle, Colorado) $240000

2009-11-07T22:17:11-07:00

A local favorite...where everyone knows your name! Here is your chance to run a bustling restaurant in the central core of Rifle. 106-seat dining room plus 22-seat conference/meeting room. This turn-key operation is waiting for you. The real estate will NOT be sold with the business, however Seller is willing to negotiate a long-term lease with the new Owner. Initial lease rate will be $3,400/month and includes water & sewer (a $400/month value). Business is exclusively marketed by Kari Meskin, Broker/Owner - Meskin Real Estate, LLC. Serious inquiries can be directed to Kari at 970-379-1993.

12 x 50 Drywalled inside Construction Trailer MUST SALE 700.00 (Grand Junction) $700

2009-11-07T18:39:38-07:00

This It is a 1975 Make:CLI Make:TL CWT/CAP/SIZE: 105

12 x 50 Trailer has large tailgate doors in the rear and 2 regular side doors. Small windows (vent roll out) all the way around. There is drywall inside and one leak in roof very small. was used for storage, but can be made into almost anything you need including a garage. it's a triple axle and has a regular hitch, not a gooseneck. It takes a heavy duty truck preferrably a Towter Truck. It also would need a wide load pilot vehicle. you can contact me in the evenings after 7:30 at 970-704-1108 or e-mail me with any questions that you may have. It is road worthy and ready to go. It has been cleaned out since these pictures were taken. The Trailer is located in Grand Junction at 2280 H Road, off of 24 Road. I will consider reasonable offer. Tanya

Hypercom T7 Plus-Pin (Telluride,CO) $200

2009-11-07T15:19:59-07:00

Used Hypercom T7 Plus-Pin for $200. Only used a few times. Still has original paper in machine. Closed business and need to sell!

80 Inch Table & 3 Display Cases (Moab, UT) $200

2009-11-06T11:46:06-07:00

Wooden Maple Table . Three identical locking display units with glass tops and slidout drawers. Table - 80 3/4"W X 26"D X 27 1/2"H. Drawers - each 24 7/8"W X 22"D X 7 7/8"H.
Will not ship. For pickup in Moab only.

Small Hexagonal Lighted Glass Case (Moab, UT) $35

2009-11-06T11:38:01-07:00

For countertop display. Two top mounted halogen lights. Three rotating glass shelves. Mirror base. Locking access door. Motor to rotate shelves has been removed. 16" Dia. X 32 1/8"H.
For pickup in Moab. Will not ship.

Countertop Lucite Shelved Cases (Moab, UT) $70

2009-11-06T11:30:58-07:00

Two units for sale, each w/ 3 Shelves + Base & Top. Sliding rear doors. 22"W X 8 3/4"D X 16 1/4"H. Good condition. $40 each, $70 for both. New units like these are $90+ each.
For pickup in Moab. Will not ship.

scouts X 2 !!!!!!!!!!!!!! (rifle)

2009-11-06T10:24:37-07:00

i've got a 76 scout 2 with 4" lift and 33" tires silver . I've also got a 69 scout 800 all stock green both would make great projects or dailly drivers make me an offer

CALL CRAIG AT (970)366-9468

The Smoothie Shack (Durango) $50000

2009-11-06T07:58:54-07:00

Turn-key juice, smoothie, and sandwich bar for sale in Durango. Located next to Hallmark in the Walmart shopping center area. Owner has relocated out of state due to new employment and is very motivated to sell quickly. Financing options available as well through the owner. No need to talk to a bank or get a loan. Call with questions 970-769-3164.

81401.com is finally for sale (Montrose, CO 81401) $2500

2009-11-05T23:26:43-07:00

Courtesy of 970WEB.COM - your local web design, maintenance and hosting professionals...

81401.com is finally for sale. Asking price of $2500. Won't last long! Email with any inquiries.
81401.net is also available. Asking price of $1500.
As are these...

81435.ORG $750
970AUCTIONS.COM $500
970BIKES.COM $500
970CARZ.COM $500
970CASH.COM $750
970CLIMB.COM $500
970CRAZY.COM $500
970DOCTORS.COM $750
970JEEPS.COM $750
970LOANS.COM $750
970MONEY.COM $750
970MORTGAGES.COM $750
970NOTES.COM $750
970REALTORS.NET $750
970USA.COM $750
MONTROSE-COLORADO.NET $1250

We can design and/or host your new site as well - or simply transfer to the hosting service of your choice. Check out pricing and samples of our work here www.970web.com

CIF forms (Grand Junction) $150

2009-11-05T21:05:40-07:00

ARXX CIF 6" core forms
From left to right: 3- 16" high 48" long, 2-left 2 right 16" high corners, 2- tapered top 16" high 48" long and 19- 12" high 48" long

FAX MACHINE: barely used-like new, must sell!!! (gj fruitvale area) $30

2009-11-05T15:34:09-07:00

Fax machine. Also doubles as a copy machine. Just plug into your phone line.
* Like new
paid, $125 must sell for $30

DISABLED SINGLE MOM Must sell!!!!!!

Call 640-0806
God bless you : )

Artistic Front Counter & Desk (Moab, UT) $400

2009-11-05T12:34:29-07:00

Granite top. Cut-out metal shapes around base on front and left side (when facing unit). Rusted metal upper. Built around desk w/ space for computer CPU, cash drawer, keyboard drawer, 3 regular desk drawers. Very unique and decorative piece.
For pickup on Moab only. Cannot ship.

Tall Hexagonal Lighted Glass Case (Moab, UT) $400

2009-11-05T12:14:56-07:00

Front and back locking doors. Side and top halogen lights. 4 Adustable glass shelves. On casters for easy moving. Very nice unit. 35 1/4"W X 21 3/4"D X 76 3/4"H.
Cannot ship. For pickup in Moab only.

Cube Display Unit on Wheels (Moab, UT) $150

2009-11-05T12:09:26-07:00

Blonde Formica. Easily moved. Versitile unit for many types of displays. 47 1/2"W X 16 1/2"D X 55 1/4"H.
For pickup in Moab only.

2 TOP BURNER US RANGE (RIFLE) $300

2009-11-05T11:16:18-07:00

Two top burner on wheeles with storge. 970-306-3686 $300.00 OBO Matt

Granite Fabrication Shop (Grand Junction) $1

2009-11-05T09:04:15-07:00

Complete granite fabrication shop equipment for sale. 3 yr old Johnsosn Bridge saw with Hydraulic cutting table. 3 Phase. Komatsu Forklift. Two routers. Vacuum slab lift. Air compressor 3 Phase.3 phase converter. Misc hand tools. Everything needed tostart your on shop. Would prefer to sale all but may negotiate piecing out if saw goes first. All equipment in great to excellent condition. Slab stock negotiable. This could possibly be a turn key operation if desired. Retirement forces sale $37.500 for all. Individual pieces negotiable.

Display units/Glass shelving (Montrose)

2009-11-04T17:35:31-07:00

Two wooden display cabinets @ $75 each or negotiable (Pictured). Mug Rack with enclosed storage (pictured), $50. Lodge Table, $75.
Glass Shelving and hardware for slat wall.
Contact John @ 970 209-8181

Well known salon (grand junction) $20000

2009-11-04T16:01:52-07:00

A six chair salon with massage room and nail tech room. Well know in Grand Junction serious people only please!

Truck mounted carpet cleaner (grand junction) $7500

2009-11-04T16:00:10-07:00

Bane Clean carpet cleaning system, NO Vehicle, comes with approx., 150 feet of hose and water line, training videos, 3 wands and waterclaw, all soaps and cleaning solutions on hand, less than 250 hours on machine. Invested over 16k. Will help get you started if needed. Call 970-640-9539

BIG tire chains (Glenwood Springs) $500

2009-11-04T13:34:41-07:00

Full set of 4 MUD service chains for 20.5 x 25 tires, used 1 month $ 800 obo. Also full set of 4 MUD service chains for 12.00 x 24 tires, used 3 months. $ 500 obo. If your interested or have questions call me @ 970-379-3898

Display Shelving (Rifle)

2009-11-04T12:23:29-07:00

Maplewood grain display shelving. Very attractive gondolas on casters. Easily move these around in your store. Units are from a large retail store that was closed.

Quadro Document/Picture Clip Frames (Durango) $15

2009-11-04T09:12:38-07:00

Quadro clip frames, great for documents such as diplomas and certificates or even for small art pieces or photos.
The frames consist of, each: 4 clips, glass and hardboard backing. Still in new condition.

Nine 9" x 12" frames
One 8" x 10" frame

$15 takes them all.

Restaurant Bar neons, decoration, hand sinks, tableware (Carbondale)

2009-11-04T04:15:58-07:00

I have lots of bar decoration signs, advertisement, multiple neons. Two plastic Hand sinks. And lots of tableware including knifes spoons and forks. Neons 75$ a piece Hand sinks 75$ make me an offer on the tableware. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David

Verifone Credit card machine and Printer Nice working condition! (Carbondale) $125

2009-11-04T04:04:38-07:00

Good Verifone 330 digital credit card swipe unit and compatible 900 model printer. Was pulled from a restaurant when it was last working a year ago. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David

Restaurant decorative tile tables & stands, plates, Microwaves dishes (Carbondale)

2009-11-04T03:52:38-07:00

I have lots of decorative tile tables with stands different lengths and widths some wood paterns also 35$ a piece. Misc white plates 2$ a piece side ranikin bowls 1$ lots of containers 2-3 dollars a piece. Microwaves 20$ each. Silverware cheap cheap cheap the more you buy the better deal you get for clearing out our extra equipment. Please give me a call on my cell preferably after 10 oclock am on my cell 970-618-8427 thanks David.

MagiKitch'n 36" Heavy Duty Char Broiler Cooking Commercial Restaurant (Carbondale) $500

2009-11-04T03:40:05-07:00

This is a used Magikitch'n Restaurant range/grill. This working unit was pulled from a restaurant in Aspen. This unit is a dirty, and will need a cleaning. Pic is what this unit looked like new when it retailed for 3,500 a great deal at 500$! I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David

Manufacturer: MagiKitch'n
Part #: FM-RMB-636 =
SKU: MAGC-5036

Top grid adjusts to a flat position and functions as a range top.
E-Z tilt top grid controls grease and flare up: 70% of the grease drains into a front trough when tilted.
15,000 BTU burners every 6".
Stainless steel "V" shaped radiants preheat in 3 minutes.
Solid cold rolled steel top cooking grid has free floating rods to prevent warping.
Stainless steel splash guards and 6" front service shelf.
Stainless steel fully insulated outer panels.
Stainless steel inner cooking area.
Floor model units feature a fully insulated lower storage area.
Show All Details 35 1/2"D x 17 3/4"H. Add 22 1/4" to height for floor models.
Adjustable 6"-7 1/2" legs standard on floor models.
Optional casters on floor models, optional legs on counter top models.
Choice of Natural or LP gas.
NSF, AGA.

Nemco 6150-72 Heat Strip 72'' Infrared Bar/Food Warmer (Carbondale) $125

2009-11-04T02:46:46-07:00

Compact, versatile and economical, NEMCO infrared bar warmers hold food at serving temperature without drying out or overcooking to ensure better tasting foods and better-looking presentations. Hanging, base-mounted and pass-through designs fit most locations, as well as permanent and temporary requirements. Durable aluminum shell for long life and easy cleanup. Comes with calrod heating element. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Manufacturer Name: Nemco Food Equipment
Product ID: NEM-6150-72
Mfg Part Number: 6150-72
Equivalents: 62406|615072|6150-72|47327|128-615072
UPC: n/a
Vendor Description: Heat Strip 72'' - Infrared Bar Warmers
Product Notes: Compact, versatile and economical, NEMCO infrared bar warmers hold food at serving temperature without drying out or overcooking to ensure better tasting foods and better-looking presentations.
Voltage: 120 Volt
Dimension (L x W x H): 3 x 72 x 3
Shipping Weight: 20
Product Cube: 0.38

Gadabout Evaporative mobile cooler commercial model with water hookups (Carbondale) $350

2009-11-04T02:35:48-07:00

This is a commercial evaporative mobile cooler or basically a portable swamp cooler. This was used in a nightclub to cool down the dancefloor. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Caravell restaurant commercial freezer (Carbondale) $300

2009-11-04T02:28:15-07:00

This is a used Carvell ice cream freezer or use it for anything needed freezing. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Holman T710 Counter Top Conveyor Bun Bagel or Pizza Toaster Oven (Carbondale) $300

2009-11-04T02:17:25-07:00

Holman electric conveyor toaster, 208 volts, 10 inch belt, speed and upper and lower elements controlls, stainless steel body, model T710. 14 X 17 X 13 1/2 inches high. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

ROBOT COUPE 3 qt FOOD PROCESSOR CONTINUOUS FEED (Carbondale) $700

2009-11-04T02:05:44-07:00

Robot Coupe 3 qt Food processor. This was used less than one year, tested works great, comes with lots of misc. craters and slicers and dicers...nice deal. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Prepare 850 servings in 3 hours or less! Vegetable prep attachment specially designed for quality, continuous feed slicing, shredding, grating and julienne. Accomodates 21 different processing blades. Bowl attachment designed for vertical cutting and mixing: mix, chop, puree, blend, mix and knead doughs.

Power: 1 HP�Single phase.
1 speed: 1725 rpm.
Induction motor. Magnetic safety system and motor brake.
Delivered with:
3 Qt. gray cutter bowl in ABS and stainless steel �S� blade included.
Vegetable preparation attachment with external ejection.
2 disc included: R209 (2mm) 5/64" grating disc and R211 (4mm) 5/32" slicing disc.
Complete selection of 21 stainless steel discs available from us.
Dimensions (H�L�W): 19 1/4" � 15 3/4" � 8 3/4" Extended H: 25 1/4"
Approx. Shipping Weight: 31 lbs.
Approx. Carton Size: 20 1/4" � 15 3/4" � 10"�Cube 1.85
ETL Electrical and Sanitation Listed/CETL (Canada).
3 year motor warranty, 1 year parts and labor.
See a complete specification sheet at: http://www.robotcoupeusa.com/downloads/specs/R-2-N-specs.pdf

COMMERCIAL FRENCH FRY POTATO VEGETABLE CUTTER SLICER (Carbondale) $70

2009-11-04T01:51:03-07:00

Commercial quality french fry cutter heavy duty all metal construction. Cut large potatoes, zuchinni, sweet potatoes, etc. by just pushing down the handle. This unit is mounted on a wood cutting board for easy use. 70$ obo. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Chefmate Commercial Restaurant Slicer model GC 512 NICE! (Carbondale) $700

2009-11-04T01:41:12-07:00

Used commercial chefmate slicer In very good shape and works great! CLEAN and includes built in sharpening stones. Requires less mechanical or spring-loaded pressure. Equipped with a chrome-plated end weight that swings away for storage behind the food chute. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Heavy duty deflector is securely fastened to the slicer, yet still easy to remove without tools.The slicer base is heavy gauge anodized aluminum that is stain resistant, long lasting and easy to clean.

Model GC 512
www.globeslicers.com

Anodized aluminum base

12" stainless steel knife

Powerful 1/3 HP, 115/60/1, 4.8 amp motor

Slices up to 7/8" thick

Overall dimensions 19.75"W x 25"D x 19.5"H

Capacity:
5 1/4�H, 9 1/2�W or 8� Dia.
(13.3cm, 24.1cm or 20.3cm)

93 lbs.

Gear driven knife
� Knife cover interlock
� Stainless steel food contact areas
� Slicer table
� Knife cover
� Knife
� Slice deflector
� Motor cover
� Gravity feed food chute
� Permanently attached metal knife sharpener
� Permanently attached knife ring guard
� Power indicator light
� Six-foot cord and plug

MSRP $4064
Typically sell for $2300-$2500

Baskin Robbins soft serve yogurt ice cream 3 head Machine (Carbondale) $500

2009-11-04T01:27:48-07:00

This is a used baskin robbins 3 head soft serve commercial dispensing machine. This unit was taken out of a restaurant in Aspen. This unit has 3 dispensers, a water faucet and sink on top and is powered by two heavy duty motors. These units usually run between 5k and 10k, we no longer have any use for a ice cream machine of this magnitude. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Coke Pepsi Bar Cold Plate Soda Gun W/attachment (Carbondale) $200

2009-11-04T01:09:39-07:00

This is a used Cold plate for your bar or establishment. This comes with a soda gun and soda bypass to syrup boxes. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Cappuccino expresso machines Brugnetti and Nuova Simonelli WORK GREAT! (Carbondale) $500

2009-11-04T00:58:59-07:00

These are two working restaurant/ commercial style cappuccino machines, just cleaned. 500$ each I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Nuova Simonelli Master Cappuccino: delivers espresso with automatic steaming and built in milk refrigerator.

STEAM / AIR BLENDING DEVICE
The Master Coffee Plus and Cappuccino models truly understand the difference between cappuccinos and lattes . With its electronically controlled steam / air blending device, the machine will deliver perfectly frothed , or perfectly steamed milk on demand every time.

Will make one or two shots (long or short depending on button pushed) of espresso at any time, as well as decaffeinated. Milk models will do shots of espresso as well as one cappuccino, latte, or just steamed milk depending on button pushed.

OTHER MASTER FEATURES

All machine operations are shown on its electronic display.
Hourly production : 180 espressos or 120 milk based (cappuccino, lattes) per hour.
Beverage counter.
Electronic coffee dose adjustment.
Push button operated automatic washing cycle (complete, coffee sector, or milk sector).
Programmable on & off.
Self diagnosis system.
All models incorporate a traditional steam wand, and hot water dispenser.
Coffee is ground per order.
Self contained volumetric pump.
Freshwater economizer (water + steam blending device) .
Warning light to indicate coffee grounds drawer full.
3.5 liter copper boiler with life time warranty.
Approvals: ETL & NSF
With Master, it�s no sooner said then done.

ELECTRICAL
All Master Models are 208/240 volt -20 amp-

WATER
1/2�or 3/8� with shut off then 3/8� female pipe thread fitting.
This is where the water filter/softener is installed.

DRAIN
Indirect drain
6�-1/2� flexible tubing

DIMENSIONS
Height Depth Width
Master Cappuccino 27.5� 20� 26.8�

WEIGHT
Gross Weight Net Weight
Master Cappuccino 198 pounds 165 pounds

Brugnetti Cappucino Maker
Brand new $9,000.00
Date on machine: 7/96
Works Great
Dual well machine

Features
- completely in stainless steel
- brass group
- 2 steam outlets (1 on 1 group machine)
- copper boiler, exchangers and pipes
- system for preventing sucked liquid into the boiler
- safety security thermostat
- standard electronic automatic level boiler
- electric heating with automatic pressure switch
- dual scale manometer for boiler and pump pressure
- volumetric pump built in

Specifications HxPxL(mm) Weight (Kg) Heating element (W)

2 groups 450x500x620 53 3000

2 Portable restaurant convection ovens Cadco Italian Made NICE shape! (Carbondale) $125

2009-11-04T00:55:47-07:00

These are two working Cadco Unox restaurant/ commercial style convection ovens, just cleaned. I belive these fit 1/4 sheet pans, these are smaller catering type ovens. 125$ a piece. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

DoughPro Automatic Pizza Press DP1300 W/compressor Works excellent! (Carbondale) $800

2009-11-04T00:44:58-07:00

This is a very nice Dough Pro Dp1300 top of the line pizza dough maker. This unit was used at a restaurant up in aspen colorado. Our family is now out of the restaurant business and have no need for it. This model has the compressor and all the top of the line components. Have your pizza crust in literally seconds and get your pizzas out to your customers much much faster with the DP1300 automatic pizza press. How fast is the DP1300? It varies, but use these figures as a guide: Warm dough, moderate to high yeast. . . . . 2 seconds Cold dough, moderate yeast . . . . 4-6 seconds Cold dough, small amount of yeast . . . . 8 seconds. This unit works excellent. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

True TWT-27 one door restaurant food prep station table (Carbondale) $500

2009-11-04T00:39:08-07:00

True model TWT-27 single door worktop refrigerator. 115 volts, Stainless steel exterior, used about 1 year, shelves included. Clean, tested and ready to use! I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Oversized and balanced, environmentally friendly (134A), refrigeration system, with airflow directed at pans for colder temperatures. Guided airflow provides uniform temperature in a 360� circle throughout cabinet for stay-fresh meats and cheeses, and older crisper salads.
Holds 33�F to 41�F product temperature in pans.
All stainless steel front, top and sides.
Stainless steel patented foam insulated cover keeps pans colder to lock in freshness - minimizes condensation.
Aluminum finished back.
Interior - attractive, NSF approved, white vinyl coated aluminum, coved corners and 300 series stainless steel floor.
Removable back hood and lid.
5" diameter castors standard (legs available).
Recessed handles.
8-7/8" wide full length removable cutting board. Versatile, sanitary, high density polyethylene provides tough surface. Large comfortable working area.
Adjustable, heavy duty, vinyl coated wire shelves.
Standard (1/6 size) 6'x6"x4" clear polycarbonate insert pans included. Also accommodates six and eight inch deep pans. (except M-C model). (TSSU-27-12M-B standard with nine 1/6 and three 1/9 size pans; TSSU-27-12M-C standard with twelve 1/6 size pans); positioned in countertop.
Foamed-in-place polyurethane high density cell insulation (CFC Free).
Front breathing.
Doors swing within cabinet dimensions.
Rear Bumpers (except dual sided models).
Low profile models with 2" castor package. (31-1/2" work surface height, upcharge applies).

Standard with 11-3/4" cutting board.
Description: Table, Food Prep, Mega Top Sandwich/Salad Unit - 1 Door - 12 Pans
Pans: Nine 1/6 and three 1/9 size pans
Doors: 1
Cu. Ft.: 6.5
# of Shelves: 2
HP: 1/5
Amps: 4.6
Weight: 182
L x D x H: 27-5/8 x 34-1/8 x 46-1/2

Manitowoc,Ice,Bin,Storage,900 lbs.lb,C-900 (Carbondale) $100

2009-11-04T00:31:00-07:00

Manitowoc, C-900 , 900 lb , ice bin , good shape , this is the painted tan enamel color that manitowoc Scotsman used to use, door & trim are is stainless , inside is blue resin , overall in good shape. I have this stored in snowmass and would be happy to meet you if you wanted a further look . I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Dimensions 34"Deep 48"Wide 50"Tall

True One Door Undercounter Prep Table TUC44 Refrigerator Cooler (Carbondale) $500

2009-11-04T00:22:33-07:00

This listing is for a used one door flat top prep table cooler including two racks. This unit has been tested and is in working and cooling perfectly, it also has been pressure washed and cleaned nicely . I have this stored in snowmass and would be happy to meet you if you wanted to further look at the fridge. I can also assist in meeting you anywhere in the valley if needed. I have lots of other restaurant equipment for sale all stored in snowmass. Lots and lots of containers, mixing bowls, margarita glasses, silverware, plates, tables, chairs ect. You can call me anytime preferably after 10 oclock am on my cell 970-618-8427, thanks David.

Mfg:TRUE

Model:TUC44,TUC-44

Power:115V, 1/5HP, 60Hz, 5.1Amp.

Refrigerant:R135A

UL.NSF

Overall dimensions:

44"W x 32"D x 33-1/4"H

Retail Counter Unit (Moab, UT) $150

2009-11-03T14:31:14-07:00

Blonde Formica. Cash register area on left. Drawer & shelf behind doors below cash register area. Counter area on right has 2 drawers and open area w/ shelf beneath.
Good condition. 60"W X 24"D X 42"H.
Will not ship. For pickup in Moab only.

ACME pro sheeter roller (Eagle) $2000

2009-11-03T12:03:12-07:00

3/4 HP, Model 88, Serial # 15758, 60 cycles, 115 volts, 11.4 amps,. stainless steel , in perfect condition with all the attachments. Sheeter was in a high school and rarely ever used but still maintained regularly. Pay me cash and I will deliver almost anywhere in CO for FREE. no scammers, donations etc. This is a great deal. Will consider trades for car, truck, ATV, motorcycle.

Carpet Cleaning Equipment (Grand Junction) $2300

2009-11-03T08:27:17-07:00

If you want to get paid $50-$100 an hour then I will sell all of my carpet cleaning equipment to you. I have a portable extracter that is worth $1,200. A wand priced at $200, a uhpolstry tool priced at $150 a rotovac wand priced at $1,500, and chemicals and assecories worth over $400. I am selling all of this for only $2,300. You will have everything you need to get in business and start making money. Everything is less then a year old I went into business for myselft in May and now I no longer need this equipement so it is like brand new. Call me as soon as possible

970-433-1092

Stainless Steel Dental Tools (Rifle Co)

2009-11-03T01:21:19-07:00

Full set stainless steel dental tools, 89 pieces.
If you know a dentist starting out or just need additional set... this is it!
Air Drill, filler, alll of it! Sale or trade. $3200.00 set.
970-440-7199 ali.kayrae@yahoo.com

Remodeled Commercial Building (Montrose) $389000

2009-11-02T18:49:27-07:00

Downtown & Remodeled
306 N 2nd Street, Montrose , CO 81401
		Totally remodeled in 2004. Solid masonry structure w/footings & stemwalls. New roof per city codes-Heavily insulated for heat/cool eff. High ceilings with mezzanine storage. ADA compliant. Huge lot w/ room for expansion or lots of parkg for employees & customers. Finished offices. Extremely clean. 2 OH doors -1 in front & 1 in back for easy access from both sides of property plus great ventilation. Evaporative cooler is portable. High ceilings. Current use: building products. $575. income on mo-mo parking lot lease. Possible owner will carry back lease.
Click to View Show
Details			Contact Info
Asking Price: MLS: Sq. Feet: Lot Size: Subdivision:	$389,000 622344 2112 12,196 Downtown Montrose		Karen Maxner Broker Associate Main (970) 249-7777 Cell (970) 596-1286 Email \| Website Other Shows

Executive Desk & Credenza (Montrose, CO) $1500

2009-11-02T14:33:40-07:00

Excellent Condition - Executive Corner Desk & Credenza Has sliding keyboard tray. Manufacturer of desk and credenza is Global Industries and the style is "Adaptability".

Desk 84" long x 96" long x 24" wide x 29" high

Credenza 36" long x 20" wide x 29" high

PICK-UP ONLY
Items shown in pictures other than furniture are not included
No returns will be accepted

Astoria Espresso Machine (Crested Butte) $2000

2009-11-02T10:58:17-07:00

Astoria Espresso Machine, two group AEP machine. Replacement cost is $4800.00, asking $2000.00 OBO. Contact Tracy at treasuryliquors@hotmail.com

RV PARK CAMPGROUND FOR SALE (MANCOS/CORTEZ) $950000

2009-11-02T09:59:22-07:00

A&A MESA VERDE RV PARK CAMPGROUND Located at the entrance of Mesa Verde National Park, Mancos Colorado. 70 campsites/34 Full Hook-Ups (32 pull throughs-2 back in) 13 Water & Electric, 21 tent sites and 1 large group tent site. 4 Log Cabins that sleeps 5. We have 2 playgrounds, recreation hall: pool table, foosball and a tv/vcr (videos for rent), heated swimming pool & hot tub, and 18 hole mini golf course. Office-store, LP, Laundry area (washers/dryers vendor owned), 2 mobile homes sitting on 12.63 acres with beautiful views of mesa Verde and the surrounding valley. See photo page at our website: www.mesaverdecamping.com
Please contact Ellie Courtney, Prudential Triple S Realty at 970-382-3084, cell# 970-749-1286 email: ellieco@fone.net

Samsung SF5100 Laser Fax/copier (Montrose) $40

2009-11-01T17:08:17-07:00

Very good condition. Fax/Phone/Copier excellent for small business or home office. Laser printer so the toner lasts much longer than ink-jet style machines.

3 two drawer file cabinets black (Montrose) $30

2009-11-01T17:07:57-07:00

Three black, two drawer filing cabinets. No keys for locks anymore. Otherwise decent shape. $10 each or 3 for $25

New Solar Product needs investors (CO) $5000

2009-11-01T12:34:39-07:00

I am a 6 yr veteran of the solar industry.
I have developed a few new & unequaled solar products.
I am trying to find investors to help cover the marketing costs for these products.
My target is $20,000 for marketing.
I am a straight foreword individual and this business arrangement will be as well.
Please contact me if you are in a position to act on this matter.

MT 65H Mikasa Wacker Jumping Jack Tamper (Mesa colo.) $650

2009-11-01T12:02:23-07:00

For Sale Mikasa Jumping Jack Tamper model MT65H, with Honda 3.0 motor runs great. $650.00, 970-270-8771

HVAC Equipment (Grand Junction) $2000

2009-11-01T09:48:37-07:00

All equip. for $.2,000.00. 1 -Tempstar Air Conditioner Model # CKA324C2A324GKA. 1 -Tempstar Airconditioner Model # T2A330GKA. 1- 410 A Evap Fan coil Model # FEM4X2400A. 1-Evap Fan Coil Model# FSM2X2400A. Trane Evap coil. 1- Evap coil Trane model# EDD2X42JA. 1-Evap coil Model C2E46C. Evap Coil Carrier 410A CK5FPXX060024ABAA. 1-Evap coil Trane TXC061C5HPCO. 5-Misc. size Heating Elements. 1-Carrier Air Purifier Model# GAPAAXCC2025. Please call 970-216-3314

Hot Dog Cart&equipment (Palisade) $3500

2009-11-01T08:58:43-07:00

Be independent, A-101 hotdog cart and everything you need to start your business. See at www. worldsbesthotdogcarts.com This cart served me well $$$$$, and now my family wants to join the operation. I am expanding to a food vendor truck. Cart comes with 2 umbrellas .large new egloo cooler ,table, condement trays swing out gas BBQ grill and more. Headed to Florida soo to check out truck. Cell 970 623 1721

Business for sale ( read description ) (Cortez, CO) $45000

2009-10-31T21:35:24-06:00

This offering is for a business that sells and services CJ750 motorcycles and sidecars. The purchaser of the business will need to relocate the entire inventory to their own location. There is no shop or retail space included in this sale. What is being sold is the inventory and certain trade secrets related to the legal importation of these classic motorcycles from China. Sources and contacts will be provided to the buyer. Inventory includes four factory restored vintage Chang Jiang CJ750 motorcycles, each with color matching side car. Extensive new parts and tires. Shop manuals and the knowledge of how to import this type motorcycle from China. Each of the four motorcycles included in this sale is currently registered in Arizona with clear and current titles. These are vintage motorcycles not new. Each bike was manufactured between 1962 and 1967. These are the years that people who really know this bike consider to be the best ever made. There is an industry in restoring these motorcycles because they are highly sought after and very affordable.

The CJ 750 is a duplicate of the WW1 German BMW R71 military sidecar rig. The Chinese bought this technology and the tools and blue prints in the 1950s and continue to manufacture a CJ750 today. What the photos below show are two of the actual bikes that are included in the sale. Each has been recently serviced. They have been upgraded with modern 12v systems and electric ( as well as kick) starters. Reverse gear has been added. Everything necessary to make these bikes fully restored has been done including new battery and new tires. Four tires counting the spare that comes with each one.

The parts inventory has a retail value of over $30,000 by itself. New crankshafts, pistons, rings, starters and etc etc. All of this is available to be seen in Cortez by appointment. Please call me. I live close to Durango so if you were flying in to Durango I could meet you at the airport and drive you to the shop in Cortez.

My name is Mac Musick my cell phone number is 707-322-3898 my home phone is 970-27-8522.

Minolta 1080 Copier w/ Sorter (Grand Junction) $150

2009-10-31T12:11:28-06:00

Up for sale is a Minolta 1080 Copier with Sorter and I have extra toner to go with it. $150.00 or make offer. Must pick up. I have a trailer and can help move it with in the Grand Junction area. $10.00 for delivery to door will not move inside. Ady questions or offers please call 970 255-1499 unit is in great shape.

Thriving Restaurant business and RE (Mesa County) $499999

2009-10-30T18:58:37-06:00

Currently an established Family Restaurant serving Mexican/American food.......Business, FF&E, AND Real Estate (approx. 2500sf building) are included in this sale. Great opportunity!
For more information please contact via email. Make sure email includes: Name, phone # and email address.
Listed by Broker/OE

Tall Bookcase for Retail Display (Moab, UT) $150

2009-10-30T16:58:20-06:00

Blonde Formica. 5 Shelves + Base & Top. Easy disassemble/reassemble. 49 1/2"W X 13 1/2"D X 91 3/4"H.
Stout unit. Good condition. Unable to ship. Must pickup in Moab.

Revolving Glass Tower Display (Moab, UT) $150

2009-10-30T16:55:46-06:00

6"H X 30"Diameter rotating melamine base. Tempered glass. Unit stands 55" high.
Nice unit. Like new. Will not ship. For pickup in Moab only.

Hexagonal Oak Pedestal Display Unit (Moab, UT) $200

2009-10-30T16:52:32-06:00

Solid Oak Wooden Display. Access doors on either side. Very nice display. 35" Dia. X 39"H.
Good condition. Cannot ship. You must pickup.

Wooden Showcases - Antique (Moab, UT) $500

2009-10-30T16:34:21-06:00

Maple veneer. 1 Ell-shaped showcase. Storage beneath. State-of-the-art Xenon lights around upper rim. 76 1/2"W X 44 1/2"D X 38"H.
Matching straight showcase. Storage beneath. 76 1/2"W X 23"D X 38"H.
Beautiful old units. Will not ship. For pickup only.

Executive Chair (Durango,Co) $100

2009-10-30T14:12:54-06:00

Leather Executive Chair. Sold for $500 new from an office furniture store. This is no cheapie. Its adjustable, reclines and swivels. Good back support as well. I hate to sell it. I just can't take it with me. $100 OBO.

Call David 970-903-4783

Banker's Lamp (Durango, CO) $25

2009-10-30T13:34:20-06:00

Antique looking banker's desk lamp with halogen bulb. $25 OBO

Call David 970-903-4783

Desk Lamp (Durango, CO) $25

2009-10-30T13:32:45-06:00

Adjustable halogen desk lamp. Needs bulb $25 OBO

Call David 970-903-4783

HP Scanner (Durango, CO) $50

2009-10-30T13:30:42-06:00

HP Scanner comes with cables and adapter for scanning photos and a hand held scanner. $50 OBO

Call David 970-903-4783

HP Printer (Durango, CO) $75

2009-10-30T13:27:19-06:00

HP 2200 InkJet Printer - comes with manuel, and cables. Uses four colors to reduce cost of operation. $75 OBO

Call David 970-903-4783

HP Printer (Durango, CO) $75

2009-10-30T13:21:00-06:00

HP LaserJet 6-P includes start up desk with drivers, manual and cable. $75 OBO

Call David 970-903-4783

9ft Hi Niker SNOW PLOW (montrose) $2400

2009-10-29T21:17:20-06:00

9FT Hi Niker snow plow I have complete set up, bracket for the truck ,wiring harness all plug in no cutting wires and in cab controll. Bracket fits 1988-2000 Chevy/Gmc all works great. Feel free to call with any questions! 970-275-6467
$2400.00 OBO

30x40 new clear span building (Montrose, CO) $4000

2009-10-29T21:15:02-06:00

new 30'W x 40'L x 11'H building is white with end curtains. Paid $4500 + shipping. Asking $4000 OBO. Please call 970-275-6467 with questions.

Inverters, Sine Wave, Modified, and Solar Panels... new. (ptl)

2009-10-29T20:31:37-06:00

We have Pure Sine Wave Inverters..and Modified Wave Inverters too! 110 and 240 volts..lots of different wattages to choose from.
We also have Hard-wired Grid-Tie inverters and plug-in -the-wall Grid tie inverters
aAND** SOLAR PANELS..85 WATT..299.00+ ship
email me for photos, videos, specs, dimensions, and prices

WORK OVER/CABLE TOOL RIG (Rangely) $85000

2009-10-29T12:18:23-06:00

Can PULL TUBING and SWAB oil/gas wells, and has rotating arm for HAMMER DRILLING. Walker-Neer manufacturer. On 1961 Mack Truck with 500 hours on overhauled Cummins diesel engine. All air-actuated, 8500' sand line, 7/8" new block line. Dickerson bed. All tooling needed to pull tubing, swabbing and pump rod pulling. Comes with 2-3/8" elevator, Cavins-B Spider, scales, and misc swabbing equipment and cups. Perfect for PLUGGING WELLS!

USED DRILL PIPE (Rangely) $1

2009-10-29T11:26:12-06:00

2-3/8" steel pipe, $1.20/ft. Also, 2-1/16" steel pipe for $1.10/ft. Average 31' lengths, all in excellent condition, very little pitting. Possible delivery.

Italian Style Deli (Montrose, CO) $56099

2009-10-28T17:30:37-06:00

An Italian style deli located on a main highway in Montrose. The deli sells sliced meat, cheeses, made to order pizzas, sandwiches and salads for eating in or take away. Started in business in May of 2005. The deli has patio seating for warmer weather, plus inside seating and lots of parking in the rear of premises.Turn key operation every thing needed to run deli is there. Owners will help new owners get started also include all recipes needed to run buisness. Also Owners will stay on for a while to help you get started. List price includes all fixtures and equipment. Supplies and packaging, etc will be totaled at time of sale.

!999 Sterling 4000 gal. water truck (Glenwoodsprings colo.) $39000

2009-10-28T16:28:28-06:00

Got this truck for a job that didn't happen, Payed $52,000 , New 40,000 gal. apoxy lined tank, front, side, rear and top cannon. Has rear street washer, and self primming.

2004 John Deere dozer 650H (Cortez) $42000

2009-10-28T13:46:56-06:00

I have a solid 2004 650H XLT John Deere dozer , new pads, 2660 hours , 2 new rippers, 6 way blade. All new filters and engine oil. $42,000 , or may consider a trade of some type. 970*222-3428

Small Pizza Restaurant (Grand Junction CO) $100000

2009-10-28T10:24:37-06:00

Small Mom and Pop Pizza Restaurant for sale, no real estate involved. Located in a shopping plaza next to a liquor store and a supermarket. Dine-in, carry-out or delivery. Laid back atmosphere, be your own boss. Serious inquiries only!

Bicycle Business Ready to Go (Delta, CO) $15000

2009-10-27T20:02:08-06:00

Delta Bike Shop is for sale. Great location in north Delta, CO on Hwy 50.

Everyone living in Delta and Montrose counties will drive by this location on their way to Grand Junction.

You can be the only full service bicycle shop in Delta County, and the only bicycle shop in town.

Business is ready to go. Lease is in place with $700 per month rent plus utilities.

Phone service with high speed internet is in place with alarm system installed and working.

All display racks, fixtures and counters are in place. Include Quickbooks Point of Sale computer system with 4 years of local sales history from Revolution Bikes.

Shop is supplied with a full complement of Park Bicycle tools ($3,500 worth of tools) for any kind of repair/service work.

Signs are at the sign shop ready to be finalized and hung on store and on street pole.

Ready to go package price: $15,000 plus monthly lease.

Call Ed at 970-234-3951 www.deltabikeshop.com

Exciting "profitable" mountain business for sale. "private" (Aspen)

2009-10-27T12:33:25-06:00

Exciting business proposition available "limited partnership spots available".

the newest "north face" patagonia" style business real and excitng chance to get in for nothing.

investment partnerships available from $500.00 USD to 1.5 Million USD

*private business offering, private individuals and investors will be considered *

Framing Business For Sale (Grand Junction, CO) $10000

2009-10-26T17:23:23-06:00

For sale is a complete shop of equipment, tools, materials and supplies to operate or start up an art / picture framing business. All equipment is in excellent working order and is 10 years or less old and has been well maintained. Included in this sale are the following:

� Seal Products Masterpiece 500T-X Dry Mounting / Laminating Press
� 2) Seal Products #1256 Perforators
� C+H Advantage Pro M48PRO Straight Line Matt Board Cutter with blades and work table
� DeWalt DW705 12� Compound Miter Saw with a Phaedra Mitering System for picture framing with a Lexicon frame scale applied. This system comes with the free-standing base and support.
� Thumbnail TN100 thumbnailer with router and bit and includes a cabinet stand with drawer.
� ITW AMP Mitre-True Picture Framer�s Disk Sander tool mounted on free-standing cabinet.
� Nielson & Bainbridge C+H BG6000 60� wall-mounted board and glass cutter system
� DeWalt electric hand drill in case
� Craftsman 7� electric hand saw
� Ryobi HTC18 PowerPen cordless rotary tool in box
� Black & Decker U140 electric finishing sander
� Coverite electric heat sealing hand iron
� Seal Products Sealector II electric tacking iron
� Included Hand Tools
o Miter box and miter saw
o 3) screw drivers
o Rubber mallet
o Putty knife
o Drill bits and case
o Hand drill
o Wire cutter pliers
o 2) canvas stretching tools
o Large wire brush
o Small SS wire brush
o 2) replaceable blade box cutters
o Wood rasp
o Awl
o Nail counter sink
o 36� framer�s square
o 4) padded print weights
o Scotch ATG 752 taping tool
o Scotch ATG 700 taping tool
o 2) Scotch tape desk-top tape dispensers
o 2) Fletcher point drivers
o 10� C-Thru triangle / square
o Swanson speed triangle / square
o Chalk line
o SER corner strap clamp system
o Surface cleaning brush
o 4) shop aprons
o 2) Precision cast corner clamps
� Office Supplies
o Texas Instruments 55 III Scientific Calculator
o Sharp electric printing calculator
o Hitachi PH-101 electric pencil sharpener
o 2) Shop stools
o 2) 6� folding tables (one is covered with carpet on the top)
o AM/FM dual cassette stero system & speakers
o 2) 3� Craft Paper dispensers (surface mount)
o Phone
o Framing books and catalogs
o Framing stock rack
o Tables, counters and such are all included
� Framing Supplies and Materials
o Large Lot of Corner Frame Samples for display
o Shadow Box display system
o Large lot of Corner Mat Board samples and sample racks
o Misc framing supplies including filler putty, points, spools of cable, cable crimps, picture hangers, metal frame assembly components, adhesives, paints, lubricants and tape
o Several assembled frames, some new, some used, color pens, markers, etc.
o Large quantity of mat board of all colors (too numerous to count)
o Large quantity of picture glass of various sizes (too numerous to count)
o Large quantity of frame stock, metal and wood, various lengths and styles (too numerous to count)
o Large quantity of foam core mounting board (too numerous to count)
o Small quantity of posters and prints of various sizes and conditions, mostly movie posters, but others in the mix
o Some framed works used as shop examples of work and shop decoration

Everything in the shop is included in this package deal. We would prefer to sell it as a lot, but would consider reasonable offers for individual pieces. This is everything you would need to start up a picture framing business of your own. All you would need is the space to set up your new operations.
We are asking $10,000.00 for the entire shop�s contents.
Please email if you are interested or have any questions or would like to see pictures of specific items. There are other pictures of items that we could email if desired. Items are located in Grand Junction, Colorado and the buyer will be responsible for removing and transporting all items included in this sale.

Publication (Durango) $150000

2009-10-26T10:54:30-06:00

Profitable well established niche publication. Strong market presence and excellent reputation, part time hours with full time pay. Additional upside to active owner. Serious inquiries, please.

Restaurant Liquidation Discount Sale (Eagle, Colorado) $60

2009-10-26T07:53:15-06:00

RESTAURANT LIQUIDATION list sold separately or as a whole

There are 24 tall black lacquer chairs, 6 tall table bases, 9 wood 4 tops, NSF tables & shelving, Hobart in line dish washer, Hobart under counter dishwasher, Double Imperial convection baking oven w/ wheels, NSF prep tables, 6 top stove burner - Imperial, Groen Steam Jacket Kettle 4-5 gal, TRUE inc. refrigerated chef drawers,32 inch Imperial
flattop griddle, True 2 door prep. station, Rankin-Delux one burner Model #RHP-112 20,000 BTU NSF, DCS Salamandor, Southbend Salamandor, Pitco Fryer, Southbend Fryer Lg.,4ft x 5ft 4 drawer black File Cabinets, Wood Employee lockers (4), countertop electric Cecilware salamandor, Southbend 6 top burner w/ oven, Bakers Pride small pizza oven 750F, metro wire rack systems, Chef Expo Counter w/ heat lamps 5 warmers shelving & ticket holders, Ventahood w/ lights in box brand new, some more other small stuff.

Please call for more pics or questions & prices 970 470 9089

Matt (970)470 9089

Custom Metal Buildings & Carports (statewide) $595

2009-10-25T19:26:43-06:00

Custom Metal Buildings - all styles, sizes and colors. Barns, garages, sheds, cabins, carports. All prices include free delivery statewide and setup on your site. Price for a single-wide carport (12'X21') starts at $595. Ten percent down initiates order, balance due on delivery. Credit cards accepted. Call for free quote 970-565-3333 or visit our website at www.WhiteEagleCarports.com.

Hix Hobby Lite T-shirt Heat Press excellent condition (Olathe) $185

2009-10-25T17:51:03-06:00

Excellent condition. Also have an Epson C120 printer with a ContinousInkSystem of pigment ink for $50. All you need is some transfer paper to get started pressing t-shirts.

The special design of the Hix Hobby Lite allows this heat press to make double sided t-shirt transfers a breeze to print. Unlike the Hix Hobby Lite, many hobby presses have the heat platen on the bottom, not allowing the shirt to wrap underneath. This Hobby Heat Press is one of the BEST hobby t-shirt presses available on the market.

The Hix Hobby Lite is an affordable heat transfer press for the hobbyist, artist, student or home user. It has a 9" x 12" heat press platen that swings away, allowing more freedom in placing items on the platen. It also features a pressure control for items up to 1.5" thick, full range temperature control, heat indicating light, easy to use pressure lever and a separate digital timer. It is lightweight and portable at only 29 pounds and will apply all types of transfer paper. This press is similar to the Geo Knight 9" x 12" Jetpress.

Features:
High pressure for plastisol as well as digital transfers.
9" x 12" even heating, swing away heat press platen
Separate digital timer
Weighs only 29 pounds
Lightweight and portable for a hobbyist to use at malls, flea markets, shows and more
Applies all types of transfer paper on items up to 1.5" thick
Easy to open and close handle with full range pressure adjustment
Calibrated thermostat can be set up to 400 degrees F
Heat indicating light turns off when the set temperature is reached
1 year warranty on components
Solid steel frame
Raised lower platen for easy garment placement
Amps/Watts (120 Volt) 7 / 850

Paint Your Own Pottery Business for sale (Delta, CO) $42000

2009-10-25T16:12:37-06:00

For Sale:
Fat Cat Pottery : a �Paint Your Own Pottery� Studio
Located in Historic Downtown Delta, Colorado
Fat Cat Pottery is an established business of 5yrs.This is a fun, family oriented business and would make a great family run business.
Asking price of $42,000.00 includes all fixtures,2 large Skutt kilns, large bisqueware inventory and more. Now�s the perfect time to buy.
November and December are the biggest months of the year. Owner will train and is willing to work with you until you feel comfortable on your own.
Contact us at fatcatpottery@tds.net or
www.fatcatpottery.net

need retail display items (Fruita)

2009-10-25T12:55:15-06:00

I need to find body forms for display, tables and shelves.
They have to be free or cheap. Is for a temporary project.
Please let me know if you have anything.

ADEC Dental Central Console (Avon, CO)

2009-10-24T22:01:29-06:00

I am remodeling and need to get this out of my office in the next couple of weeks. Will take any reasonable offer ... buyer must pick up in Avon.

http://www.a-dec.com/html/Products/Cabinets/5543CentralConsole.asp

milk keeper 500 gal cooler chore boy (grang juction) $500

2009-10-24T18:21:07-06:00

bought this with the intent to milk goats and never used it .
all that is there is what you see in the pics.
the unit was in use the day I bought it but has sat now for 8 years.
you will have to supply a new compressor for the unit ,the one that was with it has found another use.
the copper line has ben crimped over on the end to keep it clean and can easily be attach to with a new compressor.
the 3 paddle agitator is there and the electric motor but is not in the pic
this item is used and is as is .
or call and will set up shipping for a fee though some trucking service.
the trailer is not part of the auction ,but can be included in for $200.00 more.
it has a 2" ball hitch

970-858-0745 mike

Globe GSP30A Label Printing Scale (Grand Junction) $499

2009-10-24T18:07:28-06:00

Used Globe GSP30A Label Printing Scale, very good condition.

Used, but in great condition!

Capacity . . .Weighs from 0.01 lb. to 30 lbs.
-Stores Up To 3800 PLU's . . .
-Thermal Dot Printer . . .
-Scale Prints . . .
- PLU name.
- Extra message.
- Sell by date.
- Packed date.
- Unit price.
- Tare
- Weight
- PLU number
- Total Price
- Bar Code
- Store name
- Store address
-Automatic Or Digital Entry Tare . .
-88 One-Touch Preset Keys . . .
-Fluorescent tube display of tare, weight, unit price, and total price.
-Stainless Steel Platter . .

These sell for $900 - $1,400 new!

Asking $499 or best offer

Instruction Manual available on-line!

Grand Junction area

Tanning Salon For Sale (Colorado-Aspen area)

2009-10-23T23:00:39-06:00

Established tanning salon for sale. In business for 10 years. Very large loyal clientele. Mystic UV free spray booth, 8 min focus stand up, tan america, pro tan equipment. Serious inquiries only please. Due to health must sell. Turn key business that has potential to make your investment back within the first two years. Owner will carry some of the note with large down payment and collateral. 95k

4 in. valve and 6 in. valve (Steamboat Springs) $200

2009-10-23T17:46:23-06:00

I have two valves that I'm not using anymore. They worked great 6 years ago when they were taken out of service.

LOCKSMITH MOBILE SERVICE (CARBONDALE, AND ADJ CITIES)

2009-10-23T17:33:59-06:00

BE SELF EMPLOYED. Servicing Aspen to Carbondale to Glenwood Springs, and West I70 Corridor. #1 Advertiser in Area. AFTER EXPENSED INCOME, AVERAGING OVER $100,000 FOR YEARS. Possible Training Available, 4 Wheel Drive Van Included with all Equipment. Don't worry about layoffs again. THIS IS YOUR OPPORTUNITY TO BE SELF EMPLOYED. Over 6 weeks of Vacation taken every year and still earn that income. This is a VERY HIGH INCOME SMALL BUSINESS THAT is ran by One Person! Call Terry at 970 963 5625 or E/Mail tas618@q.com and I will call you at your convenience, Thank You

Custom Metal Buildings & Carports (statewide) $595

2009-10-23T14:14:59-06:00

Custom Metal Buildings - all styles, sizes and colors. Barns, garages, sheds, cabins, carports. All prices include free delivery statewide and setup on your site.
Price for a single-wide carport (12'X18') starts at $595 including delivery and setup. Ten percent down initiates order. Credit cards accepted.
Call for free quote 970-565-3333.

Solarforce 652 $6500

2009-10-23T12:56:25-06:00

The Solarforce 652 is an excellent stand up booth that will bring a genuine golden tan to your customers daily!

Year: 2005
HOURS: 111

FEATURES

52 lamps

Extruded aluminum and steel mainframe

Full body tanning coverage

9 minute tanning session

Advanced cooling system

Designed to accept exhaust system ductwork

Advanced after tan cooling system

Doors closed: 59" W x 55" D x 96" H

Doors open: 59" W x 60" D x 96" H

Recommended room size: 7' x 8'

Starpower 548 $6800

2009-10-23T12:54:19-06:00

This Starpower 548 is in great condition and has had very minimal use. It is a 2005 model with only 605 hours used!

FEATURES:

Canopy: 32

Bench: 16

12 minute tanning session

Hinged acrylic system

Extruded aluminum and steel mainframe

Duramax� 2000 exterior

Variable speed body cooling system

Facial cooling fan to cool face and neck

Advanced after tan cooling system

Superflow internal cooling system

Recommended room size: 10'L x 9'W

Salon owners, this is a deal you do not want to pass up�..add the finishing touch to your salon by bringing in a Starpower today!

SUNBOARD $9500

2009-10-23T12:46:40-06:00

SUNBOARD "Excellent Condition - Meticulously maintained equipment"
America's first and only 4-sided high pressure tanning unit

99.9% UVA - (less likely to burn than any other bed)

Manufacture Date: 12/1999
Hours: 1,424
Session Time:20 minute

20 min tanning time

23 High Pressure Lamps

Top:

5 1000w Heraeus Vertical Plug-in High Pressure
Each Side:

4 1000w Heraeus Vertical Plug-in High Pressure
Lounge:

10 400w Heraeus

Tech Specs

Size:

Length - 92" (7'8")

Width - 77" (6'5")

Height - 89"

Weight - 1200 lbs

Frosted Acrylics

Internal Fans:

High performance blowers

Power:

Three phase, 230 volt circuit

50 amp breaker, 6 gauge wire

FISHINGLOGIC.COM and FISHISM.COM (Montrose) $55

2009-10-23T07:29:30-06:00

FISHINGLOGIC.COM 12/22/2009
FISHISM.COM 10/3/2010

Free push to Godaddy.com. Accounts are easy and free to open.

Please email Godaddy.com information upon payment for transfer.

FISHINGABROAD.COM and THEANGLERSCHOICE.COM (Montrose) $25

2009-10-23T07:20:13-06:00

THEANGLERSCHOICE.COM 12/10/2009
FISHINGABROAD.COM 3/20/2010

Free push to Godaddy.com. Accounts are easy and free to open.

Please email Godaddy.com information upon payment for transfer.

TELLURIDEOPENHOUSE.COM (Montrose) $10

2009-10-23T07:17:03-06:00

TELLURIDEOPENHOUSE.COM 11/14/2009

Free push to Godaddy.com. Accounts are easy and free to open.

Please email Godaddy.com information upon payment for transfer.

ICECLIMBINGTOOLS.COM (Montrose) $24

2009-10-23T07:15:12-06:00

ICECLIMBINGTOOLS.COM 1/10/2010

Free push to Godaddy.com. Accounts are easy and free to open.

Please email Godaddy.com information upon payment for transfer.